;COM2 - RADIO 2
PORT
 PORTNUM=4		; Optional but sets port number if stated
 ID=145.090             ; Displayed by PORTS command
 TYPE=ASYNC		; Port is RS232 Com
 PROTOCOL=KISS		; TNC is used in KISS mode
 FULLDUP=1		; Only meaningful for KISS devices and KAMXL
 IOADDR=4		; 1 = SERIAL PORT COM1 ETC.
 SPEED=38400		; RS232 COM PORT SPEED
 CHANNEL=B   		; A for single channel TNC, A or B for multichannel
 PERSIST=200    	; PERSIST=256/(# of transmitters-1)
 SLOTTIME=100		; CMSA interval timer in milliseconds
 TXDELAY=500    	; Transmit keyup delay in milliseconds
 TXTAIL=0    		; TX key down, in milliseconds, at packet end
 QUALITY=0     		; Quality factor applied to node broadcasts heard on
;			; this port, unless overridden by a locked route
;			; entry. Setting to 0 stops node broadcasts
 MINQUAL=0 ;168		; Entries in the nodes table with qualities greater or
;			; equal to MINQUAL will be sent on this port. A value
;			; of 0 sends everything.
 MAXFRAME=1   		; Max outstanding frames (1 thru 7)
 FRACK=5000	        ; Level 2 timout in milliseconds 
 RESPTIME=1000  	; Level 2 delayed ack timer in milliseconds
 RETRIES=10   		; Level 2 maximum retry value
 PACLEN=128     	; Default max packet length for this port
 UNPROTO=Port4,THDSIA,MFD ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
 BCALL=KB0WSA-6		; BTEXT call. unstated defaults to APPL1CALL
 L3ONLY=0		; 1=No user downlink connects on this port
 DIGIFLAG=1   		; Digipeat: 0=OFF, 1=ALL, 255=UI Only
 DIGIPORT=0		; Port on which to send digi'd frames (0 = same port)
 USERS=0		; Maximum number of L2 sessions, 0 = no limit
ENDPORT